MACHINE RELIABILITY CONTROL BASED ON ECONOMIC CRITERIA
Abstract
The technique of separating the part directly relating to reliability from the machine production cost is presented. It enables to operate machine reliability at the production stage. The technique is formalized, and it can be applied to any engineering products.
About the Authors
Igor A. Khozyayev
Don State Technical University.
Russian Federation
Russian Federation
Victor V. Radin
Don State Technical University
Russian Federation
Russian Federation
References
1. Pronikov, A. S. Nadyozhnost` mashin / A. S. Pronikov. — Moskva: Mashinostroenie, 1988. — 590 s. — In Russian.
2. Zhak, S. V. Optimizaciya proektny`x reshenij v mashinostroenii / S. V. Zhak. — Rostov-na-Donu: Izd-vo RGU, 1988. — 168 s. — In Russian.
3. Kuz`min, F. I. Zadachi i metody` optimizacii / F. I. Kuz`min. — Moskva: Sovetskoe radio, 1982. — 225 s. — In Russian.
4. RTM 105-0-063-88. Ocenka urovnya kachestva mashin i oborudovaniya dlya zhivotno¬vodstva i kormoproizvodstva. — Moskva: Minzhivmash, 1988. — 30 s. — In Russian.
5. Metodika vy`bora pokazatelej dlya ocenki nadyozhnosti slozhny`x texnicheskix sistem. — Moskva: Gos. komitet standartov SSSR, Vsesoyuzny`j NII standartizacii, 1987. — 43 s. — In Russian.
6. Metodika sravneniya nadyozhnosti produkcii s analogami. — Moskva: Izd-vo standartov, 1989. — 17 s. — In Russian.
7. Drajker, N. Prikladnoj regressionny`j analiz / N. Drajker, G. Smit. — Moskva: Statistika, 1983. — 392 s. — In Russian.
Review
For citations:
Khozyayev I.A., Radin V.V. MACHINE RELIABILITY CONTROL BASED ON ECONOMIC CRITERIA. Vestnik of Don State Technical University. 2011;11(10):1850-1856. (In Russ.)
Views: 287
Email this article 